MAKA OFFROADBuying a new one?0434 642 836
Black BYD Shark 6 with canopy, roof rack and bull bar outside the workshop

Bring n Build · For vehicles you already own

Tell us how you use it. We'll design the build.

Already own your ute? Tell us how you use it: work, touring, or sleeping, eating and cooking out of it. We design the right setup around your vehicle and its high-voltage system, you tweak and approve it, and we build it in Baringa.

Most fitters hand you a catalogue. We do the thinking.

  • 3-year fitment warranty
  • PHEV and EV specialist workshop
  • Baringa, Sunshine Coast
3yrfitment warranty on our work
350+BYD Shark & PHEV fitouts
2020+model years we build on
15mincall with Jordan to start

Book a call or a visit

Start your build.

Tell us about your vehicle and pick a time for a 15-minute call with Jordan or a workshop visit.

  • Talk to your sales rep any time during the process
  • Pick a time straight after you send it
  • 3-year fitment warranty on our work

No need to know what accessories you want, Jordan will ask how you'll use it.

What would you like to book?

We only use your details to arrange your booking and reply about your build. Privacy policy in the footer.

Why it is a specialist job

Fitting out a plug-in ute is not the same job.

Shark 6, Ranger PHEV, Cannon Alpha or Stockman: a high-voltage vehicle changes how every build is planned. We start from the high-voltage layout and the payload, then choose the parts.

Orange high-voltage cabling routed under the tray of a plug-in uteOrange = high voltage
  1. 01

    High voltage runs underneath

    Orange cabling and battery packs sit where brackets, drill bits and wiring usually go. Every plug-in build starts from the high-voltage layout, not from the parts list.

  2. 02

    Payload is tighter

    A battery already uses part of what the ute can carry. Tub canopy or service body, lift kit or GVM upgrade: those calls decide what is left for you.

  3. 03

    HV consumption and 12V integration

    Every light, fridge and power system draws from somewhere. We plan the 12V side to work with the high-voltage system, not against it, and we don't over-fit the vehicle and wreck the efficiency you bought it for. We factor in the ADAS sensors too, as on any modern vehicle.

What Bring n Build is

Same packages. Same standard. On the ute you already drive.

Bring n Build is our done-for-you fitout service for vehicles already on the road. We don't hand you a catalogue. We look at how you use it, what the vehicle weighs and what is already fitted, design the right setup, then build it once.

  • Every Bring n Build includes
  • Packages built for the specific vehicles we work on
  • A fitout tailored to how you actually use it, from all the major manufacturers, plus custom-built parts when needed
  • Talk to your sales rep any time during the process
  • Progress images and updates while your vehicle is being built
  • A 3-year fitment warranty
  • The MAKA Vehicle Handover Package: your vehicle details (new heights, weights and accessories fitted), instructions, manuals and some MAKA merch
  • Ongoing support during work hours after the fitout
  • Products that meet our standards
  • What we need from you
  • How you want to use it: work, weekends, touring, or sleeping and cooking out of it
  • Your vehicle and anything already fitted (canopy, bar, drawers, wiring)
  • Roughly when you would like it done
  • That's it. You don't need a parts list, designing the build is our job

How it works

We do the thinking. You tweak and approve.

Most fitters hand you a catalogue and leave the decisions to you. We do the thinking, so you save the time and the headache.

Already done your research and know exactly what you want? Great. But you don't have to, that's our job and what our service is.

  1. 01

    Tell us your plans

    On a 15-minute call with Jordan or a visit to the workshop, tell us how you want to use the ute: work, touring, weekends, sleeping and cooking out of it. Plus anything already fitted.

  2. 02

    We design your build

    We put together the accessory combination that suits your use, your payload and the high-voltage layout of your vehicle.

  3. 03

    You tweak and approve

    You get the plan and a written quote. Change what you like. Once you approve it, we order the parts and book the bay.

  4. 04

    We build it in Baringa

    The vehicle spends its time with us. We fit, test and finish everything, working around the high-voltage system.

  5. 05

    Drive out with your handover pack

    You collect it with the 3-year fitment warranty and the MAKA Vehicle Handover Package: new heights and weights, accessories fitted, instructions and manuals.

Looked after the whole way

  • Talk to your sales rep any time during the process.
  • Get progress images and updates while your vehicle is being built.
  • After the fitout, ongoing support during work hours.

Vehicles

The vehicles we build on.

Plug-in and EV utes first, plus the diesel and hybrid models we know well. 2020 and newer. Not on the list? Ask us.

  • BYDShark 6PHEV
  • DenzaB5PHEV
  • DenzaB8PHEV
  • FordRangerPHEV + Super Duty
  • ToyotaHiluxHybrid + diesel
  • GWMCannon AlphaPHEV
  • JACHunterPHEV
  • CheryStockmanPHEV
  • VWAmarokDiesel

From the Baringa workshop

Real builds. Vehicles only.

Every photo here is from a MAKA job. We keep our customers private, so you will see vehicles and the work, not people.

White Shark 6 with tub removed, chassis rails and high-voltage components exposed
Shark 6 tray build mid-fit with orange high-voltage cabling routed under the tray
Grey Toyota Hilux with bull bar, service body and roof top tent
Rear of a grey BYD Shark 6 with tray, canopy, roof top tent and GVM upgrade badge
Underbody view of an airbag suspension and leaf spring upgrade
Front bay of a plug-in ute showing the high-voltage warning label

Like what you see? Come and look at one in person.

Grey Toyota Hilux with bull bar, service body and roof top tent

Who it is for

Bring n Build is for you if

  • You already own a plug-in or EV ute, or a non-HV variant of one we specialise in
  • You want it set up properly once, not added to bit by bit
  • You care about payload and doing the high-voltage side right
  • You have bought already and wondered if it is too late. It is not

Still buying? See Buy n Build

Questions

Straight answers.

Anything not here, ask Jordan on the call.

Book a 15-minute call with Jordan
Do I need to know what accessories I want?

No. Tell us how you want to use the vehicle and we design the accessory combination for you, then you tweak it and approve it. Already done your research and know exactly what you want? Great. But you don't have to, that's our job and what our service is.

I bought my ute already. Can I still get the same packages?

Yes. Bring n Build uses the same packages, the same 3-year fitment warranty and the same standard as a new-vehicle build.

I already have a canopy, bull bar or drawers. Will you work around them?

Usually, yes. Tell us what is already fitted and we will work out what stays, what moves and what it does to your payload before we quote.

Do I need to leave the vehicle with you, and for how long?

Yes, the build happens at our Baringa workshop. How long depends on the package and parts, so we will give you a realistic time on the call.

Is this only for the BYD Shark 6?

No. The Shark 6 is our core vehicle, and we also build on Denza, Ranger PHEV and non-PHEV Rangers like the Super Duty, Hilux, GWM, JAC, Chery Stockman and more. The vehicle list on this page shows the models we specialise in, 2020 and newer.

How much does a build cost?

Every build is quoted to the vehicle, how you use it and the package. The big swings come from a few decisions: tub canopy or service body, GVM upgrade or lift kit, drawers, power and lighting. Book the call and we will put a written quote together after we have talked it through.

Will I know what is happening during the build?

Yes. During the entire process you can talk to your sales rep any time, and you receive progress images and updates while the build happens. After the fitout is complete, you get ongoing support during work hours.

What does the 3-year fitment warranty cover?

It covers our fitment work for three years. It is a fitment warranty on our work, not a vehicle or manufacturer warranty, and individual products carry their own manufacturer warranties. Jordan will walk you through the detail for your build on the call.

What is in the Vehicle Handover Package?

Your vehicle details after the build (new heights, weights and the accessories fitted), instructions and manuals for what we fitted, and some MAKA merch. We walk you through it when you collect.

Will a fitout affect my vehicle warranty?

It is a fair question and it depends on the vehicle and the parts. Ask us on the call and we will be straight with you about your specific build.

I am not in Queensland. Can you still help?

Most builds are done at our Baringa workshop on the Sunshine Coast. If you are outside Queensland, tell us where you are and we will tell you what is practical.

I have not bought my vehicle yet.

Then Buy n Build is the better fit. We plan the fitout before you pick it up, so it can be built before you drive it.

Next step

Bring it in. Drive it out built.

Leave your details, choose a 15-minute call with Jordan or a visit to the workshop, then pick a time that suits you. It takes about a minute.

Workshop hours
Monday to Thursday, 6am to 4pm
Sales
Monday to Saturday, 6am to 4pm, by appointment

Tell us about your vehicle

No need to know what accessories you want, Jordan will ask how you'll use it.

What would you like to book?

We only use your details to arrange your booking and reply about your build. Privacy policy in the footer.

Book a callBook a visit