MAKA OFFROADAlready own your ute?0434 642 836
Black BYD Shark 6 with a MAKA tray, light bar and roof rack, front three-quarter view

Buy n Build · For new vehicles

Tell us how you'll use it. We'll design the build.

Buying a new vehicle? Tell us how you want to use it. We design the fitout, you tweak and approve it, and we fit it pre-rego, so you pick up a finished ute, not a stock one.

Most fitters hand you a catalogue. We do the thinking.

  • 3-year fitment warranty
  • PHEV and EV specialist workshop
  • Baringa, Sunshine Coast
3yrfitment warranty on our work
350+BYD Shark & PHEV fitouts
PRE-REGOFitouts done before you pick up the vehicle
15mincall with Jordan to start

Book a call or a visit

Start your build.

Tell us about your vehicle and pick a time for a 15-minute call with Jordan or a workshop visit.

  • Talk to your sales rep any time during the process
  • Pick a time straight after you send it
  • 3-year fitment warranty on our work

No need to know what accessories you want, Jordan will ask how you'll use it.

What would you like to book?

We only use your details to arrange your booking and reply about your build. Privacy policy in the footer.

Why it is a specialist job

Fitting out a plug-in ute is not the same job.

Shark 6, Ranger PHEV, Cannon Alpha or Stockman: a high-voltage vehicle changes how every build is planned. We start from the high-voltage layout and the payload, then choose the parts.

Orange high-voltage cabling routed under the tray of a plug-in uteOrange = high voltage
  1. 01

    High voltage runs underneath

    Orange cabling and battery packs sit where brackets, drill bits and wiring usually go. Every plug-in build starts from the high-voltage layout, not from the parts list.

  2. 02

    Payload is tighter

    A battery already uses part of what the ute can carry. Tub canopy or service body, lift kit or GVM upgrade: those calls decide what is left for you.

  3. 03

    HV consumption and 12V integration

    Every light, fridge and power system draws from somewhere. We plan the 12V side to work with the high-voltage system, not against it, and we don't over-fit the vehicle and wreck the efficiency you bought it for. We factor in the ADAS sensors too, as on any modern vehicle.

What Buy n Build is

One plan for the vehicle and the build.

Buy n Build is our done-for-you service for people buying a new vehicle. You tell us how you will use it, we design the fitout, help you source the vehicle through our dealer partners, and build it pre-rego so it is finished before you drive it home.

Finance is an option: the vehicle and the build can go in one application, subject to approval.

  • Every Buy n Build includes
  • Help choosing and sourcing the vehicle through our dealer partners
  • Packages built for the specific vehicles we work on
  • A fitout tailored to how you actually use it, from all the major manufacturers, plus custom-built parts when needed
  • Talk to your sales rep any time during the process
  • Progress images and updates while your vehicle is being built
  • A 3-year fitment warranty
  • The MAKA Vehicle Handover Package: your vehicle details (new heights, weights and accessories fitted), instructions, manuals and some MAKA merch
  • Ongoing support during work hours after the fitout
  • Products that meet our standards

How it works

We do the thinking. You tweak and approve.

Most fitters hand you a catalogue and leave the decisions to you. We do the thinking, so you save the time and the headache.

Already done your research and know exactly what you want? Great. But you don't have to, that's our job and what our service is.

  1. 01

    Tell us your plans

    On a 15-minute call with Jordan or a visit to the workshop, tell us what you are buying, or thinking of buying, and how you want to use it.

  2. 02

    We design your build

    We put together the accessory combination that suits your use, your payload and the high-voltage layout of the vehicle.

  3. 03

    You tweak and approve

    You get the plan and a written quote. Change what you like. Once you approve it, we bring in our dealer partner and get the fitout onto your order.

  4. 04

    We fit it pre-rego

    The new vehicle comes to our Baringa workshop before you pick it up. We fit, test and finish it.

  5. 05

    Pick it up built

    You collect a finished vehicle with the 3-year fitment warranty and the MAKA Vehicle Handover Package.

Looked after the whole way

  • Talk to your sales rep any time during the process.
  • Get progress images and updates while your vehicle is being built.
  • After the fitout, ongoing support during work hours.

Vehicles

The vehicles we build on.

Plug-in and EV utes first, plus the diesel and hybrid models we know well. 2020 and newer. Not on the list? Ask us.

  • BYDShark 6PHEV
  • DenzaB5PHEV
  • DenzaB8PHEV
  • FordRangerPHEV + Super Duty
  • ToyotaHiluxHybrid + diesel
  • GWMCannon AlphaPHEV
  • JACHunterPHEV
  • CheryStockmanPHEV
  • VWAmarokDiesel

From the Baringa workshop

Real builds. Vehicles only.

Every photo here is from a MAKA job. We keep our customers private, so you will see vehicles and the work, not people.

Black BYD Shark 6 tray build with roof rack and light bar
Rear of a grey BYD Shark 6 with tray, canopy, roof top tent and GVM upgrade badge
Shark 6 tray build mid-fit with orange high-voltage cabling routed under the tray
Grey Toyota Hilux with bull bar, service body and roof top tent
Front bay of a plug-in ute showing the high-voltage warning label
Underbody view of an airbag suspension and leaf spring upgrade

Like what you see? Come and look at one in person.

Rear of a grey BYD Shark 6 with tray, canopy, roof top tent and GVM upgrade badge

Who it is for

Buy n Build is for you if

  • You are ordering or about to order a new plug-in, EV or dual-cab ute
  • You do not want to drive it stock for months, then lose it to a workshop
  • You want the fitout planned before you sign, with one team managing it
  • You are a business or fleet buyer who wants vehicles ready to work

Already own your vehicle? See Bring n Build

Questions

Straight answers.

Anything not here, ask Jordan on the call.

Book a 15-minute call with Jordan
Do I need to know what accessories I want?

No. Tell us how you want to use the vehicle and we design the accessory combination for you, then you tweak it and approve it. Already done your research and know exactly what you want? Great. But you don't have to, that's our job and what our service is.

How does the fitout get onto my vehicle order?

Once you approve the quote, we introduce you to our dealer partner and work with them so the fitout is part of your order. Jordan explains each step on the call.

I already own my vehicle.

Then Bring n Build is for you. Same packages, same standard, on the ute you already drive.

Is this only for the BYD Shark 6?

No. The Shark 6 is our core vehicle, and we also build on Denza, Ranger PHEV and non-PHEV Rangers like the Super Duty, Hilux, GWM, JAC, Chery Stockman and more. The vehicle list on this page shows the models we specialise in, 2020 and newer.

Can I finance the vehicle and the build together?

Often, yes. The vehicle and the build can go in one application, subject to approval.

How much does a build cost?

Every build is quoted to the vehicle, how you use it and the package. The big swings come from a few decisions: tub canopy or service body, GVM upgrade or lift kit, drawers, power and lighting. Book the call and we will put a written quote together after we have talked it through.

How long does a build take?

It depends on the package and parts availability. We will give you a realistic timeline for your build on the call, rather than a number that sounds good here.

Will I know what is happening during the build?

Yes. During the entire process you can talk to your sales rep any time, and you receive progress images and updates while the build happens. After the fitout is complete, you get ongoing support during work hours.

What does the 3-year fitment warranty cover?

It covers our fitment work for three years. It is a fitment warranty on our work, not a vehicle or manufacturer warranty, and individual products carry their own manufacturer warranties. Jordan will walk you through the detail for your build on the call.

What is in the Vehicle Handover Package?

Your vehicle details after the build (new heights, weights and the accessories fitted), instructions and manuals for what we fitted, and some MAKA merch. We walk you through it when you collect.

Will a fitout affect my vehicle warranty?

It is a fair question and it depends on the vehicle and the parts. Ask us on the call and we will be straight with you about your specific build.

I am not in Queensland. Can you still help?

Most builds are done at our Baringa workshop on the Sunshine Coast. If you are outside Queensland, tell us where you are and we will tell you what is practical.

Next step

Your new vehicle. Built before you drive it.

Leave your details, choose a 15-minute call with Jordan or a visit to the workshop, then pick a time that suits you. It takes about a minute.

Workshop hours
Monday to Thursday, 6am to 4pm
Sales
Monday to Saturday, 6am to 4pm, by appointment

Tell us about your vehicle

No need to know what accessories you want, Jordan will ask how you'll use it.

What would you like to book?

We only use your details to arrange your booking and reply about your build. Privacy policy in the footer.

Book a callBook a visit